Acrylic, water based decorative paint effect. Creates a raw concrete look. Suited for unique design in homes and public places, e.g., hotels, restaurants, offices, etc. Comes in Variety of shades Interior use only.
Variety of colours: 10 BE Shades
Coverage rate | approx: 3-6 m2/liter in two coats on a smooth surface, Considering surface application method
Matt
Application tool | roller, sponge, brush
Packaging size (Litres)
1
Quantity on a pallet
100
Packages: 1 Litres
Interior
Brush
Sponge
STAGE 1
Fill in any holes with Plaster, should there be the need to repair the surface area, use special putty, then using sandpaper smoothen the surface. Remove dust.
STAGE 2
Apply a coat of Acrylic paint (Supercryl Series).
STAGE 3
First Coat- apply first coat of «Concrete Decorative Effect» paint with a short haired roller – Wait two hours to dry, continue to stage “4”
STAGE 4
After the wall is dry, apply the second coat of “Concrete Decorative Effect” with a roller(make sure to apply a thick layer). While paint is still wet go over the surface with a damp sponge in non uniform movements (circular or linear), this will create a concrete look. 2 square meters at a time.
*To make a clouds effect , use a brush with gentle crisscross movement across the still wet surfacein wide crisscross movements.